Mobile animated gif

Install the latest driver from the Printers folder

If the latest driver is stored on your Windows computer, perform the following steps to install it:

• Open Control Panel
• Click Hardware and Sound
• Click Printers
• Right-click the printer whose driver you need to install, and then select Run as administrator
• Click Properties
• Click Advanced
• Click the New Driver tab, and then follow the onscreen instructions to install the driver 

Resetting Cannon Printers.
The instructions provided have not been tested by us and so therefore the user takes full responsibility of what he or she does with their printer. If you are in doubt as to the credibility of these instructions then please contact a Canon service representative and verify the information yourself. Before resetting the waste ink counter be sure to replace the waste ink pad.

                      FIND YOUR CANON PRINTER BELOW

Reset ip2000 / 3000
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..
Reset MP110
1)Enter SERVICE MODE By pressing Menu-Scan-Copy-Scan
2) Enter NVRAM by pressing-- or ---> then OK
3) Enter CMY ink level by pressing <--- or ---> then OK
4) Select 1 by pressing<--- or ---> then OK
5) Enter K ink level by pressing--> then OK
6) select 1 by pressing<--- or ---> then OK
7) Press reset ( design: // )
8) SERVICE MENU COUNTER ACCESS
PRINT PAGE COUNT SCAN PAGE COUNT
-------------------------------------------------------------
Canon PIXMA iP1000
Waste Ink Counter Reset Manual for Service mode
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (LED) should be green.
4. Press and release the RESUME button , the indicator (LED) should be orange.
5. Press and release the RESUME button again, the indicator (LED) should be green.
6. Release both buttons.
-------------------------------------------------------------
Canon PIXMA iP1500
Waste Ink Counter Reset. Manual for Service mode
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (LED) should be green.
4. Press and release the RESUME button , the indicator (LED)
should be orange.
5. Press and release the RESUME button again, the indicator
(LED) should be green
6. Release both buttons
-------------------------------------------------------------
Canon i320, i255
Waste Ink Counter Reset.
Step 1 : Manual Temporary
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.
or Step 1: Manual Temporary
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (LED) should be green.
4. Press and release the RESUME button , the indicator (LED) should be orange.
5. Press and release the RESUME button again, the indicator (LED) should be green.
6. Release both buttons.
Step 2 : Software for Permanent
1. Reconnect the printer cable.
2.Open General Tools software and select (USB PORT)
3 .Choose (SET DESTINATION 1) And it should be reset.
Remark "After service mode use software for permanent reset"
------------------------------------------------------------
Canon GENERIC "S" SERIES RESET CODE
Waste Ink Counter Reset.
(1) Turn off the printer.
(2) Press and hold the RESUME button, then press and hold the POWER button.
(3) Release the RESUME button, Next press and release the RESUME button two(2) more times in
succession. Note: you are still holding the POWER button). The printer's carriage will "reset"
or move momentarily. If the above was properly performed the printer will enter the
"Service Mode".
(4) Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp
will alternate (change) color with each key press.
1. Service/Factory test printout, including ink sensor check.
2. EPROM - Info printout.
3. EPROM - Initialization.
4. Reset the Waste ink counter.
5. Printer model setting. (More selections beyond this point - However it is best leave them unaltered - You have been warned!)
After selecting the desired mode (eg. 4), press the POWER button to "set" the change, and return to the top of the function selection menu. Press the POWER button again to restart the printer.
-----------------------------------------------------------
Canon i850, i950, S600
Start with the printer OFF
1. Hold down RESUME and then hold down POWER
2. release RESUME
3. press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing
Select function with RESUME press POWER to execute:
presses - light color - function
Number of presses - light color - function
0 presses - green - Test print (or exit service mode on i960)
1 press - orange - EPROM info print (plus grid nozzle diagnostic on i960)
2 presses - green - EPROM initialize
3 presses - orange - Reset waste ink counter
----------------------------------------------------------
Canon S450 Printer
1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice
5. Release Power button
6: When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
7: Press Power to set data
----------------------------------------------------------
Canon BJC 1000 Series
1: Remove Cartridge
2: Unplug the AC Power Cord
3: Hold down the RESUME button
4: Release RESUME after plugging in the AC Power cord.
5: Press the RESUME once within 5 seconds and release the RESUME .
6: Press and HOLD RESUME for two seconds or more and release it.
7: Press and HOLD RESUME for two seconds or more and release it.
8: Unplug AC Power Cord to set data.
----------------------------------------------------------
Canon BJC-2000 BJC-2100 Series
1: Remove the Cartridge
2: Unplug the AC Power Cord
3: Close Front access panel
3: Hold down the RESUME/RESET button and plug in the AC power cord
4: Release RESUME/RESET after plugging in the AC Power cord.
5: Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET .
6: Press and HOLD RESUME/RESET for two seconds or more and release it.
7: Press and HOLD RESUME/RESET for two seconds or more and release it.
8: Unplug AC Power Cord to set data.
----------------------------------------------------------
Canon BJC-210 BJC-240 BJC-250 BJC-255 BJC-265
Canon BJC-4100 BJC-4200 BJC-4300 BJC-4400 BJC-4550 BJC-4650
Unplug Power Cord
Hold POWER and RESUME buttons
Plug in Power Cord
Release buttons
Open front door of printer
Hold the CARTRIDGE and RESUME buttons
Press POWER
Release all buttons after the beeps
Press CARTRIDGE once
Press RESUME
----------------------------------------------------------
Canon BJC-5000
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.
6: Press Power to set data
Service Test Print
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME two(2)times. The indicator should be GREEN.
6: Press Power to Print
Nozzle Print
1: Power off printer
2: Press and POWER, until the printer beeps and release.
Demonstration Print
1: While the printer in ON , , Press and hold RESUME until the printer plays a melody of beeps.
----------------------------------------------------------
Canon BJC-5100
Self Test
Switch Printer off. Hold Power for 1 beep.
Waste Counter Reset
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.
6: Press Power to set data
Service Test Print
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME two(2)times. The indicator should be GREEN.
6: Press Power to Print
Nozzle Print
1: Power off printer
2: Press and POWER, until the printer beeps and release.
Demonstration Print
1: While the printer in ON , , Press and hold RESUME until the printer plays a melody of beeps.
----------------------------------------------------------
Canon BJC-3000 BJC-6000 BJC-6100 BJC-6200 S400 S450 F300 F600 F620
Canon BJC-7000 BJC-7100 BJC-8000 BJ-F800 i6500
1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice
5: When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
6: Press Power to set data
-----------------------------------------------------------
Canon BJC-600 BJC-600e BJC-610 BJC-620
1: Unplug Power Cord
2: Hold POWER and FF and Print Mode buttons
3: Plug in Power Cord
4: Release after the beeps
-----------------------------------------------------------
Canon BJC-50 BJC-55 BJC-80 BJC-85 M40 M70
1: Unplug Power Cord
2: Hold POWER and RESUME buttons
3: Plug in Power Cord
4: Release buttons after the printers starts up
5: Hold CARTRIDGE and RESUME
6: Press POWER
7: Release all buttons after the beeps
8: Press CARTRIDGE 16 times
9: Press RESUME
10: Unplug the Power cord
-----------------------------------------------------------
Canon BJ-30 BJC-35v BJC-70
F14 Error Reset
1: Unplug adapter
2: Hold POWER
3: Plug in ADAPTER
4: Release POWER after printer starts
5: Hold FF and MENU and press POWER
6: Release after beeps
7: Press <> Cartridge until 1A is displayed
8: Press ONLINE
9: Press POWER to shutoff printer
10: Unplug printer then re-plug printer
----------------------------------------------------------
Canon BJ F900, F890, F700, F500, S900, S820, S750 and S520
Turn off the printer.
Press and hold the RESUME button, then press and hold the POWER button.
Release the RESUME button, then press and release the RESUME button two more times in succession. (you're still holding the POWER button during this). The printer mechanics will move momentarily.
You are now in Service mode.
Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function
1. service/factory test printout, including ink sensor check
2. EPROM info printout
3. EPROM initialization
4. Clear the waste-ink counter
5. Printer model setting. (more selections beyond this- leave this alone)
After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a restart
----------------------------------------------------------
Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950, PIXMA IP3000
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.
----------------------------------------------------------
Canon S900, S820, S750, S520
1. Turn off the printer.
2. Press and hold the RESUME button, then press and hold the POWER button.
3. While still holding the POWER button, Release the RESUME button, then press and release the RESUME button two more times in succession.
4. The printer mechanics will move momentarily. You are now in Service mode. Release the Power Button.
5. Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.

1. Service/factory test printout, including ink sensor check
2. EPROM info printout
3. EPROM initialization
4. Clear the waste-ink counter
5. Printer model setting. (more selections beyond this- leave this alone)

6. After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a restart.
---------------------------------------------------------
Canon S9000
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.
---------------------------------------------------------
Canon MPC190
Reset Waste Ink
1) Enter SERVICE MODE.
By pressing Menu Copy Scan Copy Copy
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.
------------------------------------------------------------------
The instructions provided have not been tested by us and so therefore the user takes full responsibility of what he or she does with their printer. If you are in doubt as to the credibility of these instructions then please contact a Canon service representative and verify the information yourself.

Instructions

1. • 1
     Hold down the "Resume" button on your Canon printer for one to two minutes, and then release the button. In some instances, this may reset the printer automatically.
   • 2
     Unplug the power cable from the back of the Canon printer if the printer did not reset when you held down the "Resume" button. Hold the power button down and plug the power cable back into the Canon printer. Do not release the power button.
   • 3
     Press the "Resume" button on the Canon printer two times and release the Canon's power button. The Canon printer resets to the factory settings and the ink level should appear full.

Read more : http://www.ehow.com/how_7243850_reset-canon-printers.html

Instructions

1. • 1
     Hold down the "Resume" button on your Canon printer for one to two minutes, and then release the button. In some instances, this may reset the printer automatically.
   • 2
     Unplug the power cable from the back of the Canon printer if the printer did not reset when you held down the "Resume" button. Hold the power button down and plug the power cable back into the Canon printer. Do not release the power button.
   • 3
     Press the "Resume" button on the Canon printer two times and release the Canon's power button. The Canon printer resets to the factory settings and the ink level should appear full.

Read more : http://www.ehow.com/how_7243850_reset-canon-printers.html

Windows Genuine Advantage Problem

What is Windows Genuine Advantage?

Windows Genuine Advantage is Microsoft's not so subtle crackdown on illegal piracy of Windows XP and Microsoft Office products. Microsoft started with an ActiveX component to force owners of Windows XP to validate their version before downloading security updates. Unfortunately this particular scheme was rather easily foiled by groups on the net andworkarounds appeared almost instantly including cracked files and javascript fixes. Now Microsoft is becoming more advanced in their attack on pirated versions of Windows XP or Microsoft Office. They are including a Windows Genuine Advantage security patch in the updates of Windows XP. The newest patch, released the first week of June 2006, actually produces popups on the login screen and on the desktop explaining that this version of Windows XP is not genuine and the owner may be the victim of software counterfeiting. If your version of Windows XP is not genuine and does not pass the validation schemes, you will not be able to download security patches from Windows Update, or install the latest version of Internet Explorer 7 and other software. For those users that do have a valid version of Windows XP, Microsoft offers some special promotions.

Windows Genuine Advantage (WGA) is an anti-piracy system created by Microsoftthat enforces online validation of the licensing of several recent Microsoft Windowsoperating systems when accessing several services, such as Windows Update, and downloading Windows components from the Microsoft Download Center. In Windows 7, WGA is renamed Windows Activation Technology^[1]. WGA consists of two components: an installable component called WGA Notifications that hooks into Winlogonand validates the Windows license upon each logon and an ActiveX control that checks the validity of the Windows license when downloading certain updates from the Microsoft Download Center or Windows Update. WGA Notifications covers Windows XP, Windows Vista and current versions of Windows 7. It does not cover other versions of the Windows NT family, such as Windows 2000, Windows Server 2003 and Windows XP Professional x64 Edition, or the Windows 9x family. The ActiveX control however checks Windows 2000 Professional licenses as well.^[2]

WGA also advertises the latest service pack for Windows XP, which requires manual intervention to disable. Previously voluntary, it became mandatory for use of these services in July 2005.

Despite its name it does not actually evaluate the integrity or security of any computer.

File:WGA_Logo.png

http://upload.wikimedia.org/wikipedia/en/7/7c/WGA_Logo.png

What you need to prevent this is a special tools that will validate your os and make it Genuine.

download link ;

WGA Remover

WGA Remover 2011 for Windows 7

Registry Easy

Howto repair your windows boot issues through recovery console, the expert way.

If you are using Windows XP, you might be aware of the option “Repair Windows XP Using Recovery Console” at the setup of your Windows XP installation.

This is one of the most undertilised options that is being used by users when there is a crash in the Windows XP operating system.

I recently encountered this issue with my clients laptop as his laptop keeps on restarting.

When that happen, the only idea i will get is the boot up file (Boot.ini) is corrupted.

Normally the easiest way out is to use the “Automatic Repair” function, but in this case that option is unavailable on my client’s laptop.

Another way out is to “F” (which means format) the hard drive of the laptop but think about the valuable data you are going to erase .

Hence, I’m giving my shot using the “old-school” command prompt style which is the Recovery Console”.

Press R on your keyboard to enter the Recovery Console.

Basically on the Recovery Console is only command prompt, nothing else.

To begin Windows will provide you the necessary information for you to begin your repair.

Here are he steps for you to take note when performing this process:-

1) After the first question, type 1 and press enter.

Type the administrator password (if available) and hit enter.

2) Type CD .. (note there must be a space between CD and .. )

This will bring you to the main “C” directory.

3) Type the following attributes.

• C:\>ATTRIB -H C:\\BOOT.INI
• C:\>ATTRIB -R C:\\BOOT.INI
• C:\>ATTRIB -S C:\\BOOT.INI

4) Type DEL BOOT.INI

5) After that type BOOTCFG /Rebuild

This process may take some time to complete,

Once that is done, just type CHKDSK /R /F .

This procees again will take some time as it will check the disk status. Do note it can take up to 30 minutes or more on slower machines.

Once the check disk process is complete, complete the whole process by typing FIXBOOT and click enter.

You will be given a prompt that reads “Sure you want to write a new bootsector to the partition C: ?”

Simply type Y for yes. Once done, type exit to restart your PC. You will now be able to boot normally on your Windows XP.

Make your windows7 looki like mac

So you’re perfectly happy with the way Windows 7 functions, but you’re finding the trademark Apple soft, gray sexiness from OS X 10.7 Lion irresistible? Fear not, oh yeah of multi-OS affinities! A new transformation pack makes skinning Windows 7 to like OS X Lion an absolute breeze. You’ll find it over at DeviantArt from user hameddanger. Before you get started, make sure to create a System Restore point just in case anything should go wrong during the installation process. The theme pack will patch certain system files, so there’s always a chance something could go awry — but it worked just fine on both my Windows 7 systems, on running 32-bit and one 64-bit.

This particular theme is neatly packaged as a no-fuss installer. Just download, double-click, and keep clicking next until you reach the end of the process. After a reboot several new apps will appear in your system tray, each one imparting a bit of the Lion look and feel — including Leftsider to move the maximize/minimize/restore buttons, UberIcon to add the bounce effect to your desktop icons, RocketDock, and Y’s Shadow.

The finished look is very nice, though it’s not without glitches. The top portion of a Firefox 4+ window, for example, looks a bit odd with no borders. Another irk is that drop shadows behind application windows are blurred by Windows 7′s Aero Glass functionality. Disabling transparency in your personalization won’t really help — you’ll be left with non-transparent shadows which look even less attractive. I’d also like to see an Expose impersonator added to the pack, like dexpose2 (though it’s certainly easy enough to download and install separately) to complete the look.

DOWNLOAD LINK: http://www.mediafire.com/?qdgi6odfjhd36rc

More at Into Windows